Charnwood W650 Instrucciones de operaciones descargar pdf (Pagina 10)

Using a set square (fig24) adjust the back stop for the angle fence with a flat bladed

screwdriver (fig25) so that the angle fence is at 90 degrees to the blade when the back of

the angle fence is against the stop, tighten the back stop up with a 4mm hex key.

Fix the end stop onto the angle fence (fig 26)

Fig.26

Fig.28

Fig.31

Fig.32 Fig.33

Fig.23

Fig.24 Fig.25

Fig.26

1 2 ... 5 6 7 8 9 10 11 12

Sin comentarios

Charnwood W650 Instrucciones de operaciones Pagina 10