Charnwood W721 Instrucciones de operaciones descargar pdf (Pagina 7)

Screw the longest of the 6 mm hex headed

bolts into its hole as shown.

Place the table in position on the trunnion

and fix it with the four remaining 6 mm bolts.

Check to see if the blade is centred in the

slot. You will probably find that it is offset to

one side or the other.

This pointer is adjustable if the setscrew is

loosened. You may need to make a small

adjustment after the table is set

perpendicular to the blade.

If the table needs to be moved laterally to

centre the slot on the blade, loosen these

three screws, move the table to the correct

position and retighten the bolts.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sin comentarios

Charnwood W721 Instrucciones de operaciones Pagina 7